The surface of the acrylic sheet is of high quality and the light transmittance reaches 92%, so it is nicknamed "Amethyst". There are various types of thin and thick plates, various colors, and large plasticity in production and processing, which is convenient for machining and manufacturing and can be made into various types of goods. Naturally, all items are not perfect, and they also have certain defects. Then, what are the defects of acrylic products, now let Golden Sanye Display Engineering "reveal" it for you!
Acrylic board furniture also has special attention in the production and processing of acrylic products and after production and processing. The following 4 points are shared for everyone's reference:
Point 1: The thermal deformation of the general acrylic sheet is stable at about 100 °C, so in the case of making acrylic products, it is necessary to pay attention to this temperature value. For example, the temperature should not exceed 90 °C under the condition of continuous application. °C.
Point 2: The strength of the surface of acrylic products is equivalent to that of aluminum, so be careful not to scratch the surface when using or processing acrylic. If accidentally scratched, the original smooth surface can be repaired according to the polishing treatment.
Point 3: When the surface is slightly scratched, or the acrylic product is blurred or stained due to the suction of dust caused by the discharge of the tip, you can use a soft towel to dip 1% soap solution on the surface. Clean and tidy.
Point 4: This is a key link that must be paid attention to in the whole process of acrylic product assembly because the acrylic sheet has a certain degree of thermal deformation. It is necessary to take into account beforehand and vacate a certain amount of retractable indoor space.
